Materials
(Parts and Tools)
The wires joint to connector at describe on the right figure.
You may to decide which color is conntected which pin number this step.
| How to make the Printer cable for X680x0 series. | ||
|---|---|---|
| ||
| Required Materials (Parts and Tools) |
14pins box connector (Pressure type) | Qty. 1 |
| Amphenol 36pins male connector. | Qty. 1 | |
| 12 electric wires included cable. | Qty. Your required length. | |
| Solder iron and Solder | Qty. 1 set | |
| Nipper or Cutter for cable modify. | Qty. 1 | |
| Ohm tester for cable test | Qty. 1 | |
| Step. 1 | You must preparation required materials. | |
| Step. 2 | The wires joint to connector at describe on the right figure. You may to decide which color is conntected which pin number this step. | |
| Step. 3 | Make a 14pins box connector. | |
| Step. 4 | Make a amphenol 36pins male connector. | |
| Step. 5 |
Let's test the created cable by use the ohm tester and check the cable connection is correctly. | |
| Step. 6 | If passed the test, then connect the printer and X680x0 series computer. | |
| Next, Some document is print from your X680x0 and it is correctly, then your work is finished. | ||